Veritas Storage Foundation Cross-Platform Data Sharing 5.0 AdministratorÆs Guide, HP-UX 11i v3, First Edition, May 2008

36 Maintaining your system
Displaying information
...
# vxprint -F %cds -G -g dgTestSol2
on
The disk group, dgTestSol2, is shown as having the CDS flag set.
Displaying the maximum number of devices in a CDS disk group
To display the maximum number of devices in a CDS disk group
Type the following command:
# vxprint -g diskgroup -GF %maxdev
Displaying map length and map alignment of traditional DRL logs
To display the map length and map alignment of traditional DRL logs
◆ Type the following commands
# vxprint -g dg1 -vl volume
# vxprint -g dg1 -vF '%name %logmap_len %logmap_align' \
volume
Displaying the disk group alignment
To display the disk group alignment
◆ Type the following command:
# vxprint -g diskgroup -G -F %align
Utilities such as vxprint and vxdg list that print information about disk
group records also output the disk group alignment.
Displaying the log map length and alignment
To display the log map length and alignment
◆ Type the following command:
# vxprint [ -g diskgroup ] -lv volume
For example, to print information for the volume vol1 in disk group dg1:
# vxprint -g dg1 -lv vol1
The output is of the form:
logging: type=REGION loglen=0 serial=0/0 mapalign=0
maplen=0 (disabled)
This indicates a log map alignment (logmap_align) value of 0, and a log
map length (
logmap_len) value of 0.
If the log map is set and enabled, the command and results may be in the
following form: