Veritas Storage Foundation 5.1 SP1: Storage and Availability Management for Oracle (5900-1504, April 2011)

Set at least one of the parameters in maxclass, minclass, statinterval,
sweeptime, sweepinterval, purgetime, or purgeinterval, to enable default values.
Add at least one class to enable the default classes.
Table 14-1 lists the options for the dbdst_admin command:
Table 14-1
dbdst_admin command options
DescriptionCommand option
Specifies the ORACLE_SID, which is the name of
the Oracle instance.
-S $ORACLE_SID
Lists all of the SmartTier for Oracle parameters
of the database, including class name and
description.
This option should be used exclusively from the
other options.
list
Maximum number of storage classes allowed in
the database. The default value is 4.
maxclass
Minimum number of storage classes allowed in
the database. The default value is 2.
minclass
Interval for file sweeping for file relocation.
Default value is 1, which means one per day. If
this value is set to 0, all scheduled sweep tasks
will become unscheduled.
sweepinterval
Time per day for the file sweep to take place.
Times are entered in 24-hour periods and should
list hour: minute. For example, 8:30 AM is
represented as 08:30 and 10:00 PM is represented
as 22:00. Default value is 22:00.
sweeptime
Interval in minutes for gathering file statistics.
Default value is 30, which represents every 30
minutes. If this value is set to 0, all scheduled
tasks will become unscheduled.
statinterval
Number of days after which the file statistics in
the repository will be summarized and purged.
Default value is 30. It is recommended that you
set your purge interval sooner because you will
not be able to view any statistics until the first
30-day interval is over, if you use the default.
purgeinterval
247Configuring and administering SmartTier
Configuring SmartTier for Oracle