Veritas Storage Foundation 5.1 SP1: Storage and Availability Management for Oracle (5900-1504, April 2011)

Disassociate and remove any older DCO object and DCO volumes.

# vxassist -g PRODdg remove log data_vol logtype=dco

Upgrade the volume by associating a new DCO object and DCO volume.

# vxsnap -g PRODdg prepare data_vol alloc="PRODdg01,PRODdg02"

View the existing DCO plexes and plex state.

Scenario 1

In this scenario, there are enough DCO plexes for the data plexes. Also, no

data plex is associated with a DCO plex.

# vxprint -g PRODdg

The following output appears on a system running the HPUX OS.

TY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0 PUTIL0

dg PRODdg PRODdg - - - - - -

dm PRODdg01 Disk_1 - 71117760 - - - -

dm PRODdg02 Disk_2 - 71117760 - - - -

dm PRODdg03 Disk_3 - 71117760 - - - -

v data_vol fsgen

ENABLED 4194304 - ACTIVE - -

pl data_vol-01 data_vol

ENABLED 4194304 - ACTIVE - -

sd PRODdg01-01 data_vol-01

ENABLED 4194304 0 - - -

pl data_vol-04 data_vol

ENABLED 4194304 - SNAPDONE - -

sd PRODdg02-03 data_vol-04

ENABLED 4194304 0 - - -

dc data_vol_dco data_vol

- - - - - -

v data_vol_dcl gen

ENABLED 560 - ACTIVE - -

pl data_vol_dcl-01 data_vol_dcl

ENABLED 560 - ACTIVE - -

sd PRODdg01-02 data_vol_dcl-01

ENABLED 560 0 - - -

Using Database FlashSnap for backup and off-host processing

Preparing hosts and storage for Database FlashSnap

142