Veritas Storage Foundation 5.1 SP1: Storage and Availability Management for Oracle (5900-1504, April 2011)

8
Verify that the dbed_flashsnap tag has been set to the desired data plex,
data_vol-02:
# vxprint -g PRODdg -F%name -e"pl_v_name in \"data_vol\" \
&& p2 in \"dbed_flashsnap\""
data_vol-02
9
To verify that the snapshot volume was created successfully, use the vxprint
-g dg command as follows:
TY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0 PUTIL0
dg PRODdg PRODdg - - - - - -
dm PRODdg01 Disk_1 - 71117760 - - - -
dm PRODdg02 Disk_2 - 71117760 - - - -
dm PRODdg03 Disk_3 - 71117760 - - - -
v data_vol fsgen
ENABLED 4194304 - ACTIVE - -
pl data_vol-01 data_vol
ENABLED 4194304 - ACTIVE - -
sd PRODdg03-01 data_vol-01
ENABLED 4194304 0 - - -
pl data_vol-02 data_vol
ENABLED 4194304 - SNAPDONE - -
sd PRODdg02-01 data_vol-02
ENABLED 4194304 0 - - -
dc data_vol_dco data_vol
- - - - - -
v data_vol_dcl gen
ENABLED 560 - ACTIVE - -
pl data_vol_dcl-01 data_vol_dcl ENABLED
560 - ACTIVE - -
sd PRODdg01-01 data_vol_dcl-01 ENABLED
560 0 - - -
pl data_vol_dcl-02 data_vol_dcl DISABLED
560 - DCOSNP - -
sd PRODdg02-02 data_vol_dcl-02 ENABLED
560 0 - - -
Identify that the specified plex is in the SNAPDONE state. In this example, it
is data_vol-02.
The snapshot mirror is now ready to be used.
Using Database FlashSnap for backup and off-host processing
Preparing hosts and storage for Database FlashSnap
138