Veritas Storage Foundation 5.1 SP1 for Oracle RAC Administrator"s Guide (5900-1512, April 2011)

Table 3-6
Checking cluster-ID match - messages (continued)
ResolutionCauseError message
Update the /etc/llttab
file to correctly reflect the
cluster IDs of the nodes in
the cluster. Restart the
cluster.
The /etc/llttab file
has been incorrectly
modified manually.
Error: Cluster-ID
differences between:
<list of nodes>.
Fencing configuration checks failed with errors
This check is valid only for disk-based I/O fencing.
The fencing configuration checks may fail with the following error:
Checking Fencing configuration on sys_name...Failed
You may see the following messages in the logs:
■
Error: Symantec I/O Fencing module is not configured on node: sys_name
■
Error: Failed (Configured in disabled mode)
Configure with diskbased fencing or CPS.
Table 3-7 lists the messages displayed for the check.
Table 3-7
Checking fencing configuration - messages
ResolutionCauseError message
Configure I/O fencing.
For instructions to
configure I/O fencing, see
the chapter "Configuring
SF Oracle RAC" in the
Veritas Storage
Foundation for Oracle RAC
Installation and
Configuration Guide.
Ignore the check failure if
server-based fencing is
configured.
Fencing is not
configured on the
cluster.
Fencing is configured
using CPS.
Symantec I/O Fencing module
is not configured on node:
sys_name
Troubleshooting SF Oracle RAC
Troubleshooting installation and configuration check failures
180