Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

3
Enter 1 at the prompt to configure CP server on a single-node VCS cluster.
The configuration utility then runs the following preconfiguration checks:
■ Checks to see if a single-node VCS cluster is running with the supported
platform.
The CP server requires VCS to be installed and configured before its
configuration.
■ Checks to see if the CP server is already configured on the system.
If the CP server is already configured, then the configuration utility
informs the user and requests that the user unconfigure the CP server
before trying to configure it.
4
Enter the name of the CP server.
Enter the name of the CP Server: mycps1.symantecexample.com
5
Enter a valid virtual IP address on which the CP server process should depend
on.
Enter a valid Virtual IP address on which
the CP Server process should depend on:
10.209.83.85
You can also use IPv6 address.
6
Enter the CP server port number or press Enter to accept the default value
(14250).
Enter a port number in range [49152, 65535], or
press <enter> for default port (14250):
101Preparing to configure SFCFS
Setting up the CP server