Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

To configure the CP server cluster in secure mode

◆

Run the installer as follows to configure the CP server cluster in secure mode:

# installsfcfs -security

See “Preparing to configure the clusters in secure mode” on page 73.

Setting up shared storage for the CP server database

Symantec recommends that you create a mirrored volume for the CP server

database and that you use the vxfs file system type.

If you configured SFHA on the CP server cluster, perform the following procedure

to set up shared storage for the CP server database.

To set up shared storage for the CP server database

Create a disk group containing the disks. You require two disks to create a

mirrored volume.

For example:

# vxdg init cps_dg disk1 disk2

Import the disk group if it's not already imported.

For example:

# vxdg import cps_dg

99Preparing to configure SFCFS

Setting up the CP server