Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

Figure 7-3

Workflow to configure non-SCSI3 server-based I/O fencing

Configure server-based fencing

(customized mode) with CP servers

Install and configure VCS or SFHA on CP server

systems

Manually configure non-SCSI3 server-based I/O

fencing

Preparatory tasks

Identify existing CP servers

Configuration tasks

Use one of the following methods

If the CP server is clustered, set up shared

storage for the CP server

Run the configure_cps utility and follow the

prompts (or) Manually configure CP server

Establish TCP/IP connection between CP server

and SFCFS cluster

If SFCFS cluster is configured in secure mode,

configure CP server in secure mode

Run the installsfcfs -fencing, choose option 1,

enter n to confirm that storage is not SCSI3-

compliant, and follow the prompts

Edit the values in the response file you created

and use them with installsfcfs -responsefile

command

(OR)

Set up CP server

Establish TCP/IP connection between CP server

and SFCFS cluster

SFCFS in non-

SCSI3 compliant

virtual

environment ?

After you perform the preparatory tasks, you can use any of the following methods

to configure I/O fencing:

91Preparing to configure SFCFS

About planning to configure I/O fencing