Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

The value for the domain name of the root broker
system. Execute the following command to find this
value:
venus> # vssat showalltrustedcreds
root_domain
2
Make a note of the following authentication broker information for each node.
This information is required for the input file for the encrypted file:
The value for the authentication broker identity, which
you provided to create authentication broker principal
on the root broker system.
This is the value for the --prplname option of the
addprpl command.
See “Creating authentication broker accounts on root
broker system” on page 78.
identity
The value for the authentication broker password,
which you provided to create authentication broker
principal on the root broker system.
This is the value for the --password option of the
addprpl command.
See “Creating authentication broker accounts on root
broker system” on page 78.
password
3
For each node in the cluster, create the input file for the encrypted file.
The installer presents the format of the input file for the encrypted file when
you proceed to configure the Authentication Service using encrypted file.
For example, the input file for authentication broker on galaxy resembles:
[setuptrust]
broker=venus.symantecexample.com
hash=758a33dbd6fae751630058ace3dedb54e562fe98
securitylevel=high
[configab]
identity=galaxy
password=password
root_domain=[e-mail]
root_broker=venus.symantecexample.com:2821
Preparing to configure SFCFS
Preparing to configure the clusters in secure mode
80