Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

When the webinstaller script starts the xprtlwid process, the script displays a
URL. Use this URL to access the Web-based installer from Internet Explorer or
FireFox.
The Web installer creates log files whenever the Web installer is operating. While
the installation processes are operating, the log files are located in a session-based
directory under the /var/tmp directory. After the install process completes, the
log files are located in the /opt/VRTS/install/logs directory. It is recommended
that you keep the files for auditing, debugging, and for future use.
The location of the Veritas XPortal Server configuration file is
/var/opt/webinstaller/xprtlwid.conf.
See “Before using the Veritas Web-based installer” on page 66.
See “Starting the Veritas Web-based installer” on page 67.
Features not supported with Web-based installer
In this release, the following features that can be performed using the script
installer are not available in the Web-based installer:
■ Configuring server-based I/O fencing
■ Configuring non-SCSI3 I/O fencing in virtual environments where SCSI3 is
not supported
Before using the Veritas Web-based installer
The Veritas Web-based installer requires the following configuration.
Table 6-1
Web-based installer requirements
RequirementsFunctionSystem
Must be a supported
platform for Veritas
Storage Foundation
Cluster File System 5.1
SP1.
The systems where you plan to install
the Veritas products.
Target system
Must use the same
operating system as the
target systems and must
be at one of the
supported operating
system update levels.
The server where you start the
installation. The installation media is
accessible from the installation
server.
Installation server
Installing Storage Foundation Cluster File System using the web-based installer
Features not supported with Web-based installer
66