Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

■ Recommended depots: installs the full feature set without optional depots.
■ All depots: installs all available depots.
Each option displays the disk space that is required for installation. Select
which option you want to install and press Return.
9
You are prompted to enter the system names (in the following example,
"host1" and "host2") on which the software is to be installed. Enter the system
name or names and then press Return.
Enter the system names separated by spaces:[q?] (host1 host2)
10
During the initial system check, the installer verifies that communication
between systems has been set up.
If the installer hangs or asks for a login password, stop the installer and set
up ssh or rsh. Then run the installer again.
See “About configuring secure shell or remote shell communication modes
before installing products” on page 405.
11
After the system checks complete, the installer displays a list of the depots
that will be installed. Press Enter to continue with the installation.
Installing Storage Foundation Cluster File System using the common product installer
Installing Storage Foundation Cluster File System using the product installer
62