Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

Note: If you have obtained a Veritas product from an electronic download site,
the single product download files do not contain the installer installation script,
so you must use the product installation script to install the product. For example,
if you download Veritas Cluster File System, use the installsfcfs script instead
of the installer script.
To install Storage Foundation Cluster File System products
1
To install on multiple systems, set up the systems so that commands between
systems execute without prompting for passwords or confirmations.
See “About configuring secure shell or remote shell communication modes
before installing products” on page 405.
2
Load and mount the software disc.
3
Move to the top-level directory on the disc.
# cd /dvd_mount
4
From this directory, type the following command to install on the local system.
Also use this command to install on remote systems provided that the secure
shell (ssh) or remote shell (rsh) utilities are configured:
# ./installer
5
Enter I to install and press Return.
6
From the Installation menu, choose the I option for Install and enter the
number for Storage Foundation Cluster File System or Storage Foundation
Cluster File System HA. Press Return.
The example installation assumes you have selected SFCFS HA.
7
At the prompt, specify whether you accept the terms of the End User License
Agreement (EULA).
Do you agree with the terms of the End User License Agreement as
specified in the
storage_foundation_cluster_file_system/EULA/lang/EULA_CFS_Ux_5.1SP1.pdf
file present
on the media? [y,n,q,?] y
8
Select from one of the following install options:
■ Minimal depots: installs only the basic functionality for the selected
product.
61Installing Storage Foundation Cluster File System using the common product installer
Installing Storage Foundation Cluster File System using the product installer