Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

Verify that the disc is mounted:

# mount

About the Veritas installer

The installer also enables you to configure the product, verify preinstallation

requirements, and view the product’s description.

If you obtained a standalone Veritas product from an electronic download site,

the single-product download files do not contain the general product installer.

Use the product installation script to install the product.

See “About installation scripts” on page 369.

At most points during the installation you can type the following characters for

different actions:

■ Use b (back) to return to a previous section of the installation procedure. The

back feature of the installation scripts is context-sensitive, so it returns to the

beginning of a grouped section of questions.

■ Use Control–c to stop and exit the program if an installation procedure hangs.

After a short delay, the script exits.

■ Use q to quit the installer.

■ Use ? to display help information.

■ Use the Enter button to accept a default response.

Additional options are available for the installer.

See “Installation script options” on page 370.

Installing Storage Foundation Cluster File System

using the product installer

The product installer is the recommended method to license and install Storage

Foundation Cluster File System or Storage Foundation Cluster File System HA.

The following sample procedure is based on the installation of a Veritas Storage

Foundation Cluster File System HA cluster with two nodes: "host1" and "host2"

If you are installing on standalone systems only, some steps are unnecessary, and

these are indicated.

Default responses are enclosed by parentheses. Press Return to accept defaults.

Installing Storage Foundation Cluster File System using the common product installer

About the Veritas installer