Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

http://go.symantec.com/vom
When you set the product license level for the first time, you enable keyless
licensing for that system. If you install with the product installer and select the
keyless option, you are prompted to select the product and feature level that you
want to license.
After you install, you can change product license levels at any time to reflect the
products and functionality that you want to license. When you set a product level,
you agree that you have the license for that functionality.
To set or change the product level
1
View the current setting for the product level.
# vxkeyless -v display
2
View the possible settings for the product level.
# vxkeyless displayall
3
Set the desired product level.
# vxkeyless -q set prod_levels
where prod_levels is a comma-separated list of keywords, as shown in step 2
If you want to remove keyless licensing and enter a key, you must clear the keyless
licenses. Use the NONE keyword to clear all keys from the system.
Warning: Clearing the keys disables the Veritas products until you install a new
key or set a new product level.
To clear the product license level
1
View the current setting for the product license level.
# vxkeyless [-v] display
2
If there are keyless licenses installed, remove all keyless licenses:
# vxkeyless [-q] set NONE
For more details on using the vxkeyless utility, see the vxkeyless(1m) manual
page.
53Licensing Veritas products
Setting or changing the product level for keyless licensing