Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

udp 0 0 *.49196 *.*
udp 0 0 *.* *.*
udp 0 0 *.snmp *.*
udp 0 0 *.* *.*
udp 0 0 *.49153 *.*
udp 0 0 *.echo *.*
udp 0 0 *.discard *.*
udp 0 0 *.daytime *.*
udp 0 0 *.chargen *.*
udp 0 0 *.syslog *.*
Look in the UDP section of the output; the UDP ports that are listed under Local
Address are already in use. If a port is listed in the /etc/services file, its associated
name is displayed rather than the port number in the output.
Sample configuration: direct-attached links
Figure K-1 depicts a typical configuration of direct-attached links employing LLT
over UDP.
Figure K-1
A typical configuration of direct-attached links that use LLT over
UDP
UDP Port = 50001;
IP = fe80::21a:64ff:fe92:1b47;
Link Tag = link2
UDP Port = 50000;
IP = fe80::21a:64ff:fe92:1b46;
Link Tag = link1
fe80::21a:64ff:fe92:1a93;
Link Tag = link2
fe80::21a:64ff:fe92:1a92;
Link Tag = link1
Switches
Node0 Node1
Configuring LLT over UDP using IPv6
Manually configuring LLT over UDP using IPv6
484