Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

6
If you receive this report, use the haremajor command on Node A to change
the major number (32/33) to match that of Node B (36/37). For example, enter:
# haremajor -vx 36 37
If the command fails again, you receive a report similar to the following:
Error: Preexisting major number 36
These are available numbers on this node: 126...
Check /etc/name_to_major on all systems for
available numbers.
7
If you receive the second report, choose the larger of the two available
numbers (in this example, 128). Use this number in the haremajor command
to reconcile the major numbers. Type the following command on both nodes:
# haremajor -vx 128 129
8
Reboot each node on which haremajor was successful.
9
If the minor numbers match, proceed to reconcile the major and minor
numbers of your next NFS block device.
10
If the block device on which the minor number does not match is a volume,
consult the vxdg(1M) manual page. The manual page provides instructions
on reconciling the Veritas Volume Manager minor numbers, and gives specific
reference to the reminor option.
Node where the vxio driver number have been changed require rebooting.
479Reconciling major/minor numbers for NFS shared disks
Reconciling major/minor numbers for NFS shared disks