Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

Troubleshooting cluster

installation

This appendix includes the following topics:

■ Installer cannot create UUID for the cluster

■ The vxfentsthdw utility fails when SCSI TEST UNIT READY command fails

■ Troubleshooting server-based I/O fencing

■ Troubleshooting server-based fencing on the SFCFS cluster nodes

■ Troubleshooting server-based I/O fencing in mixed mode

Installer cannot create UUID for the cluster

The installer displays the following error message if the installer cannot find the

uuidconfig.pl script before it configures the UUID for the cluster:

Couldn't find uuidconfig.pl for uuid configuration,

please create uuid manually before start vcs

You may see the error message during SFCFS configuration, upgrade, or when

you add a node to the cluster using the installer.

Workaround: To start SFCFS, you must run the uuidconfig.pl script manually to

configure the UUID on each cluster node.

See the Veritas Cluster Server Administrator's Guide.

Appendix