Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

Table F-10
CFSfsckd Agent attributes (continued)
DescriptionDimensionAttribute
Resource-type level attribute that determines
whether the CFSfsckd agent must perform
intelligent resource monitoring. You can also
override the value of this attribute at
resource-level.
This attribute includes the following keys:
■ Mode: Define this attribute to enable or disable
intelligent resource monitoring.
Valid values are as follows:
■ 0—Does not perform intelligent resource
monitoring
■ 1—Performs intelligent resource
monitoring for offline resources and
performs poll-based monitoring for online
resources
■ 2—Performs intelligent resource
monitoring for online resources and
performs poll-based monitoring for offline
resources
■ 3—Performs intelligent resource
monitoring for both online and for offline
resources
Default: 0
■ MonitorFreq: This key value specifies the
frequency at which the agent invokes the
monitor agent function. The value of this key
is an integer.
Default: 1
You can set this key to a non-zero value for
cases where the agent requires to perform
both poll-based and intelligent resource
monitoring. If the value is 0, the agent does
not perform poll-based process check
monitoring.
After the resource registers with the AMF
kernel driver, the agent calls the monitor
agent function as follows:
■ After every (MonitorFreq x
MonitorInterval) number of seconds for
online resources
443High availability agent information
CFSfsckd agent