Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

Table C-2
CP server response file definitions (continued)
DefinitionResponse file field
This response field indicates whether the CP servers
and SFCFS clusters use different root brokers.
Entering a "1" indicates that they are using different
root brokers.
Entering a "0" indicates that they are not using
different root brokers.
fencing_cpc_diffab
The disks being used as coordination points if any.fencing_cpc_disks
Total number of coordination points being used,
including both CP servers and disks.
fencing_cpc_ncps
The number of disks being used.fencing_cpc_ndisks
The port of the CP server that is denoted by cps .fencing_cpc_ports
The name of the authentication broker (AB) for any
one of the SFCFS cluster nodes.
fencing_cpc_ccab
The port at which the authentication broker (AB)
mentioned above listens for authentication..
fencing_cpc_cpsabport
The port at which the authentication broker (AB)
mentioned above listens for authentication.
fencing_cpc_ccabport
The disk mechanism that is used by customized
fencing.
The value for this field is either "raw" or "dmp"
fencing_cpc_mechanism
The name of the authentication broker (AB) for any
one of the CP servers.
fencing_cpc_cpsab
This field indicates whether security is enabled or not
Entering a "1" indicates that security is enabled.
Entering a "0" indicates that security has not been
enabled.
fencing_cpc_security
Sample response file for configuring server-based
I/O fencing
The following is a sample response file used for server-based I/O fencing :
Configuring I/O fencing using a response file
Sample response file for configuring server-based I/O fencing
400