Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

Disk-based fencing with the disk group to be created means that the disk group
does not exist yet, but will be created with the disks mentioned as coordination
point.
Table C-2 lists the fields in the response file that are relevant for server-based
customized I/O fencing.
Table C-2
CP server response file definitions
DefinitionResponse file field
Enter '1' or '0' depending upon whether you want to
configure the Coordination Point agent using the
installer or not.
Enter "0" if you do not want to configure the
Coordination Point agent using the installer.
Enter "1" if you want to use the installer to configure
the Coordination Point agent.
fencing_cpc_config_cpagent
Name of the service group which will have the
Coordination Point agent resource as part of it.
Note: This field is obsolete if the
fencing_cpc_config_cpagent field is given a
value of '0'.
fencing_cpc_cpagentgrp
Virtual IP address or Virtual hostname of the CP
servers.
fencing_cpc_cps
This response file field indicates whether to reuse an
existing DG name for the fencing configuration in
customized fencing (CP server and coordinator disks).
Enter either a "1" or "0".
Entering a "1" indicates reuse, and entering a "0"
indicates do not reuse.
When reusing an existing DG name for the mixed
mode fencing configuration. you need to manually
add a line of text , such as
"$CFG{fencing_cpc_reusedg}=0" or
"$CFG{fencing_cpc_reusedg}=1" before proceeding
with a silent installation.
fencing_cpc_reusedg
The name of the disk group to be used in the
customized fencing, where at least one disk is being
used.
fencing_cpc_dgname
399Configuring I/O fencing using a response file
Response file variables to configure server-based I/O fencing