Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

Table B-5
Response file variables specific to configuring LLT over UDP
(continued)
DescriptionList or
Scalar
Variable
Stores the netmask (prefix for IPv6) that the
heartbeat link uses on node1.
You can have four heartbeat links and <n>
for this response file variable can take values
1 to 4 for the respective heartbeat links.
(Required)
ScalarCFG{vcs_udplink<n>_netmask}
{<system1>}
Stores the netmask (prefix for IPv6) that the
low-priority heartbeat link uses on node1.
You can have four low-priority heartbeat links
and <n> for this response file variable can
take values 1 to 4 for the respective
low-priority heartbeat links.
(Required)
ScalarCFG{vcs_udplinklowpri<n>
_netmask}
{<system1>}
Table B-6 lists the response file variables that specify the required information
to configure virtual IP for Storage Foundation Cluster File System cluster.
Table B-6
Response file variables specific to configuring virtual IP for Storage
Foundation Cluster File System cluster
DescriptionList or ScalarVariable
Defines the NIC device to use on a
system. You can enter ‘all’ as a
system value if the same NIC is
used on all systems.
(Optional)
ScalarCFG{vcs_csgnic}
{system}
Defines the virtual IP address for
the cluster.
(Optional)
ScalarCFG{vcs_csgvip}
Defines the Netmask of the virtual
IP address for the cluster.
(Optional)
ScalarCFG{vcs_csgnetmask}
Table B-7 lists the response file variables that specify the required information
to configure the Storage Foundation Cluster File System cluster in secure mode.
Response files
Response file variables to configure Storage Foundation Cluster File System
388