Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

Table B-2
Response file variables specific to configuring Storage Foundation
Cluster File System (continued)
DescriptionList or ScalarVariable
Defines Boolean value 0 or 1.
The value 1 indicates that the
installation logs are uploaded to the
Symantec Web site.
The value 0 indicates that the
installation logs are not uploaded
to the Symantec Web site.
(Optional)
Scalar$CFG{uploadlogs}
Note that some optional variables make it necessary to define other optional
variables. For example, all the variables that are related to the cluster service
group (the csgnic, csgvip, and csgnetmask variables) must be defined if any are
defined. The same is true for the SMTP notification (the smtpserver, smtprecp,
and smtprsev variables), the SNMP trap notification (the snmpport, snmpcons,
and snmpcsev variables), and the Global Cluster Option (the gconic, gcovip, and
gconetmask variables).
Table B-3 lists the response file variables that specify the required information
to configure a basic Storage Foundation Cluster File System cluster.
Table B-3
Response file variables specific to configuring a basic Storage
Foundation Cluster File System cluster
DescriptionList or ScalarVariable
An integer between 0 and 65535
that uniquely identifies the cluster.
(Required)
ScalarCFG{vcs_clusterid}
Defines the name of the cluster.
(Required)
ScalarCFG{vcs_clustername}
Indicates whether or not to start
LLT and GAB when you set up a
single-node cluster. The value can
be 0 (do not start) or 1 (start).
(Required)
ScalarCFG{vcs_allowcomms}
385Response files
Response file variables to configure Storage Foundation Cluster File System