Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)
To configure SFCFS using response files
1
Make sure the SFCFS depots are installed on the systems where you want to
configure SFCFS.
2
Copy the response file to one of the cluster systems where you want to
configure SFCFS.
3
Edit the values of the response file variables as necessary.
To configure optional features, you must define appropriate values for all
the response file variables that are related to the optional feature.
See “Response file variables to configure Storage Foundation Cluster File
System” on page 383.
4
Start the configuration from the system to which you copied the response
file. For example:
# /opt/VRTS/install/installsfcfs -responsefile /tmp/response_file
Where /tmp/response_file is the response file’s full path name.
Upgrading SFCFS using response files
Typically, you can use the response file that the installer generates after you
perform SFCFS upgrade on one cluster to upgrade SFCFS on other clusters. You
can also create a response file using the -makeresponsefile option of the installer.
To perform automated SFCFS upgrade
1
Make sure the systems where you want to upgrade SFCFS meet the upgrade
requirements.
2
Make sure the pre-upgrade tasks are completed.
3
Copy the response file to one of the cluster systems where you want to upgrade
SFCFS.
4
Edit the values of the response file variables as necessary.
379Response files
Upgrading SFCFS using response files