Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

Table A-1
Available command line options (continued)
FunctionCommand Line Option
Designates the path of a directory that contains
all patches to install. The directory is typically an
NFS-mounted location and must be accessible by
all specified installation systems.
–patchpath patch_path
Displays a list of depots and the order of
installation in a human-readable format. This
option only applies to the individual product
installation scripts. For example, use the -pkginfo
option with the installvcs script to display VCS
depots.
–pkginfo
Designates the path of a directory that contains
all depots to install. The directory is typically an
NFS-mounted location and must be accessible by
all specified installation systems.
–pkgpath package_path
Discovers and displays the depot group
(minimum, recommended, all) and depots that
are installed on the specified systems.
–pkgset
Displays product's depots in correct installation
order by group.
–pkgtable
Checks for different HA and file system-related
processes, the availability of different ports, and
the availability of cluster-related service groups.
–postcheck
Performs a preinstallation check to determine if
systems meet all installation requirements.
Symantec recommends doing a precheck before
installing a product.
–precheck
Displays the recommended depots and patches
required for the specified product. The depots and
patches are listed in correct installation order.
Optional depots are not listed. The output can be
used to create scripts for command line installs,
or for installations over a network. See allpkgs
option.
–recpkgs
Displays progress details without showing the
progress bar.
–redirect
373Installation scripts
Installation script options