Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

A configuration utility that is part of VRTScps package is used to remove the CP
server configuration. When using the configuration utility, a configuration removal
script is run and the following tasks are performed:
■ All CP server configuration files are removed
■ The VCS configuration for CP server is removed
After running the utility and script, you can then uninstall VCS from the node or
cluster.
Note: The configuration script has to run only once per CP server (which can be
on a single node or SFHA cluster), when removing the CP server configuration.
The configuration utility performs the following steps to remove the CP server
configuration:
■ Takes the the CP server service group (CPSSG) offline, if it is online
■ Removes the CPSSG service group from the VCS configuration
The following procedure describes how to remove the CP server configuration.
To remove the CP server configuration
1
To run the configuration removal script, enter the following command on
the node where you want to remove the CP server configuration:
[e-mail] # /opt/VRTScps/bin/configure_cps.pl
2
The Veritas Coordination Point Server Configuration utility appears with an
option menu.
VERITAS COORDINATION POINT SERVER CONFIGURATION UTILITY
=======================================================
Select one of the following:
[1] Configure Coordination Point Server on single node VCS system
[2] Configure Coordination Point Server on SFHA cluster
[3] Unconfigure Coordination Point Server
3
Select option 3 to unconfigure the Coordination Point Server.
363Uninstalling Storage Foundation Cluster File System
Removing the CP server configuration using the removal script