Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

10
Create the database on the file system you created in the previous step.
11
Configure the VCS service groups for the database.
12
Verify that all VCS service groups are online.
Configuring a cluster at the secondary site
To set up a multi-node or single-node cluster on the secondary site:
■ Set up the cluster
■ Set up the database
The setup requirements for the secondary site parallel the requirements for the
primary site with a few additions or exceptions as noted below.
Important requirements for global clustering:
■ Cluster names on the primary and secondary sites must be unique.
■ Make sure that you use the same OS user and group IDs for Oracle for
installation and configuration on both the primary and secondary clusters.
Setting up the cluster on the secondary site
To set up the cluster on secondary site
1
Install and configure servers and storage.
2
If you are using hardware-based replication, install the sofware for managing
your array.
3
Verify that you have the correct installation options enabled, whether you
are using keyless licensing or installing keys manually. You must have the
GCO option for a global cluster. If you are using VVR for replication, you must
have it enabled.
4
Install and configure SFCFS. Prepare for your installation according to your
configuration needs.
For preparation:
See “Prerequisites for Veritas Storage Foundation Cluster File System”
on page 39.
For installation:
See “About the Web-based installer” on page 65.
5
For a multi-node cluster, configure I/O fencing.
315Setting up a replicated global cluster
Configuring a cluster at the secondary site