Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

3
Add SFCFS and webserver principal to AB on node saturn.
# vssat addprpl --pdrtype ab --domain HA_SERVICES --prplname
webserver_VCS_prplname --password new_password --prpltype
service --can_proxy
4
Create /etc/VRTSvcs/conf/config/.secure file.
# touch /etc/VRTSvcs/conf/config/.secure
Starting fencing on the new node
Perform the following steps to start fencing on the new node.
To start fencing on the new node
1
If you are using disk-based fencing on at least one node, copy the following
files from one of the nodes in the existing cluster to the new node:
/etc/default/vxfen
/etc/vxfendg
/etc/vxfenmode
If you are using pure CP server-based fencing on the existing cluster, then
only the /etc/vxfenmode file needs to be copied on the new node.
2
Start fencing on the new node:
3
On the new node, verify that the GAB port memberships are a, b, and d:
# gabconfig -a
GAB Port Memberships
===============================================================
Port a gen df204 membership 012
Port b gen df20d membership 012
Port d gen df20a membership 012
After adding the new node
Start VCS on the new node.
291Adding a node to a cluster
Adding a node to a cluster