Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

If the existing cluster uses server-based fencing in secure mode, provide

responses to the following installer prompts.

If you are using different root brokers for the CP server and the client SFCFS

cluster, enter y to confirm the use of different root brokers. The installer

attempts to establish trust between the new node being added to the cluster

and the authentication broker of the CP server.

Are you using different Root Brokers for the CP Server(s) and the

client cluster? (If so then installer will try to establish trust

between the new node(s) being added and CP Server's

Authentication Broker) [y,n,q] (n) y

Enter the host name of the authentication broker used for any one of the CP

servers.

Enter hostname of the Authentication Broker being used for any one

of the CP Server(s): [b] mycps1.symantecexample.com

Enter the port number where the authentication broker for the CP server

listens to establish trust with the new node:

Enter the port where the Authentication Broker

mycps1.symantecexample.com for the CP Server(s) is listening

for establishing trust: [b] (2821)

The installer then starts all the required Veritas processes and joins the new

node to cluster.

Note: Do not quit the installer if you want to perform the Oracle

pre-installation tasks using the SFCFS installer.

Confirm using lltstat -n and gabconfig -a.

Adding a node using the Web-based installer

You can use the Web-based installer to add a node to a cluster.

Adding a node to a cluster

284