Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

Verifying the cluster nodes
Verify the information of the cluster systems using the hasys -display command.
The information for each node in the output should be similar.
Refer to the hasys(1M) manual page.
Refer to the Veritas Cluster Server Administrator's Guide for information about
the system attributes for VCS.
To verify the cluster nodes
◆
On one of the nodes, type the hasys -display command:
hasys -display
The example shows the output when the command is run on the node galaxy.
The list continues with similar information for nebula (not shown) and any
other nodes in the cluster.
ValueAttribute#System
0AgentsStoppedgalaxy
100AvailableCapacitygalaxy
BindTo None CPUNumber 0CPUBindinggalaxy
0CPUUsagegalaxy
Enabled 0 ActionThreshold 0
ActionTimeLimit 0 Action NONE
NotifyThreshold 0 NotifyTimeLimit 0
CPUUsageMonitoringgalaxy
100Capacitygalaxy
141ConfigBlockCountgalaxy
33975ConfigCheckSumgalaxy
CURRENTConfigDiskStategalaxy
/etc/VRTSvcs/conf/configConfigFilegalaxy
0ConfigInfoCntgalaxy
Wed 14 Oct 2009 17:22:48ConfigModDategalaxy
DownConnectorStategalaxy
CurrentLimitsgalaxy
271Verifying the Storage Foundation Cluster File System installation
Verifying LLT, GAB, and cluster operation