Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

■ If GAB does not operate, the command does not return any GAB port
membership information:
GAB Port Memberships
===================================
Verifying the cluster
Verify the status of the cluster using the hastatus command. This command
returns the system state and the group state.
Refer to the hastatus(1M) manual page.
Refer to the Veritas Cluster Server Administrator's Guide for a description of
system states and the transitions between them.
To verify the cluster
1
To verify the status of the cluster, type the following command:
hastatus -summary
The output resembles:
-- SYSTEM STATE
-- System State Frozen
A galaxy RUNNING 0
A nebula RUNNING 0
-- GROUP STATE
-- Group System Probed AutoDisabled State
B cvm galaxy Y N ONLINE
B cvm nebula Y N ONLINE
B VxSS galaxy Y N ONLINE
B VxSS nebula Y N ONLINE
Note that the VxSS service group is displayed only if you have configured the
cluster in secure mode.
2
Review the command output for the following information:
■ The system state
If the value of the system state is RUNNING, the cluster is successfully
started.
Verifying the Storage Foundation Cluster File System installation
Verifying LLT, GAB, and cluster operation
270