Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

The command reports the status on the two active nodes in the cluster, galaxy
and nebula.
For each correctly configured node, the information must show the following:
■ A state of OPEN
■ A status for each link of UP
■ A MAC address for each link
However, the output in the example shows different details for the node
nebula. The private network connection is possibly broken or the information
in the /etc/llttab file may be incorrect.
6
To obtain information about the ports open for LLT, type lltstat -p on any
node.
For example, type lltstat -p on the node galaxy in a two-node cluster:
lltstat -p
The output resembles:
LLT port information:
Port Usage Cookie
0 gab 0x0
opens: 0 2 3 4 5 6 7 8 9 10 11 ... 60 61 62 63
connects: 0 1
7 gab 0x7
opens: 0 2 3 4 5 6 7 8 9 10 11 ... 60 61 62 63
connects: 0 1
63 gab 0x1F
opens: 0 2 3 4 5 6 7 8 9 10 11 ... 60 61 62 63
connects: 0 1
Verifying GAB
Verify the GAB operation using the gabconfig -a command. This command
returns the GAB port membership information.
The ports indicate the following:
GABa
I/O fencingb
Oracle Disk Manager (ODM)d
Verifying the Storage Foundation Cluster File System installation
Verifying LLT, GAB, and cluster operation
268