Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

*0 galaxy OPEN 2
1 nebula OPEN 2
Each node has two links and each node is in the OPEN state. The asterisk (*)
denotes the node on which you typed the command.
If LLT does not operate, the command does not return any LLT links
information: If only one network is connected, the command returns the
following LLT statistics information:
LLT node information:
Node State Links
* 0 galaxy OPEN 2
1 nebula OPEN 2
2 saturn OPEN 1
3
Log in as superuser on the node nebula.
4
Run the lltstat command on the node nebula to view the status of LLT.
lltstat -n
The output on nebula resembles:
LLT node information:
Node State Links
0 galaxy OPEN 2
*1 nebula OPEN 2
5
To view additional information about LLT, run the lltstat -nvv command
on each node.
For example, run the following command on the node galaxy in a two-node
cluster:
lltstat -nvv active
The output on galaxy resembles:
Node State Link Status Address
*0 galaxy OPEN
lan1 UP 08:00:20:93:0E:34
lan2 UP 08:00:20:93:0E:38
1 nebula OPEN
lan1 UP 08:00:20:8F:D1:F2
lan2 DOWN
267Verifying the Storage Foundation Cluster File System installation
Verifying LLT, GAB, and cluster operation