Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

6
Verify that you can log on to VCS. For example
# halogin vcsadmin1 password
# hasys -state
VCS NOTICE V-16-1-52563 VCS Login:vcsadmin1
#System Attribute Value
galaxy Attribute RUNNING
nebula Attribute RUNNING
Similarly, you can use the same LDAP user credentials to log on to the SFCFS
node using the VCS Cluster Manager (Java Console).
7
To enable LDAP authentication on other nodes in the cluster, perform the
procedure on each of the nodes in the cluster.
Starting and stopping processes for the Veritas
products
After the installation and configuration is complete, the Veritas product installer
starts the processes that are used by the installed products. You can use the
product installer to stop or start the processes, if required.
To stop the processes
◆
Use the -stop option to stop the product installation script.
For example, to stop the product's processes, enter the following command:
# ./installer -stop
To start the processes
◆
Use the -start option to start the product installation script.
For example, to start the product's processes, enter the following command:
# ./installer -start
Checking Veritas Volume Manager processes
Use the following procedure to verify that Volume Manager processes are running.
Verifying the Storage Foundation Cluster File System installation
Starting and stopping processes for the Veritas products
258