Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

Table 2-1
Installation and configuration methods
DescriptionMethod
You can use one of the following script-based
installers:
■ Common product installer script:
installer
The common product installer script
provides a menu that simplifies the
selection of installation and
configuration options.
Use this method to install other products,
such as the Symantec Product
Authentication Service (AT), along with
SFCFS.
■ Product-specific installation script:
installsfcfs
■ The product-specific installation script
provides command-line interface options.
Installing and configuring with the
installsfcfs script is identical to
specifying SFCFS from the installer
script.
Use this method to install or configure
only SFCFS.
Interactive installation and configuration
using the script-based installer
Note: If you obtained SFCFS from an
electronic download site, you must use the
installsfcfs script instead of the
installer script.
The response file automates installation and
configuration by using system and
configuration information stored in a
specified file instead of prompting for
information. You can use the script-based
installers with the response file to install
silently on one or more systems.
See “About response files” on page 377.
Silent installation using the response file
The Web-based installer provides an
interface to manage the installation and
configuration from a remote site using a
standard Web browser.
./webinstaller
See “About the Web-based installer”
on page 65.
Web-based installer
29Before you install
About installation and configuration methods