Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

Unmount all the VxFS file systems which are not under VCS control. If the

local file systems are under VCS control, then VCS unmounts the file systems

when the failover service group is brought offline.

On the nodes that have any mounted VxFS local file systems that are not

under VCS control:

# umount -F vxfs -a

Stop all the activity on the volumes and deport the local disk groups. If the

local disk groups are part of VCS failover service groups, then VCS deports

the disk groups when the failover service group is brought offline in step 3.

# vxvol -g dg_name stopall

# vxdg deport dg_name

Upgrade the existing SFHA to SFCFS or SFCFSHA 5.1 SP1:

For SFCFS:

# ./installsfcfs

For SFCFS HA:

# ./installsfcfsha

After installation is completed, reboot all the nodes.

After all nodes are rebooted, bring up CVM and the resources.

Verify that all SFHA processes have started. You can verify using the following

commands:

# gabconfig -a

# hastatus -summ

Configure CVM and the resources:

# /opt/VRTS/bin/cfscluster config

This automatically detects the cluster configuration such as node-names,

cluster name, and cluster=id and brings up CVM resources on all the nodes

in the cluster.

To verify:

# gabconfig -a

# hastatus -summ

Migrating from SFHA to SFCFS or SFCFSHA

Migrating from SFHA to SFCFS or SFCFS HA 5.1 SP1

242