Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

3
Upgrade from HP-UX 11i v2 to the latest available HP-UX 11i v3 fusion release,
using practices recommended by HP. The HP-UX 11i v3 fusion release includes
VxVM 5.0 by default.
4
If patches to HP-UX 11i v3 are required, apply the patches before upgrading
the product.
5
Install Storage Foundation 5.1 SP1 for HP-UX 11i v3.
6
Start Storage Foundation 5.1 SP1 HP-UX 11i v3 using the installsf -start
option.
Upgrading from VxVM 5.0 on HP-UX 11i v3 to VxVM 5.1 SP1
using integrated VxVM 5.1 SP1 package for HP-UX 11i v3
You can upgrade from VxVM 5.0 on HP-UX 11i v3 to VxVM 5.1 SP1 on HP-UX 11i
v3. Use the integrated VxVM 5.1 SP1 package for HP-UX 11i v3 from the ignite
depot.
To upgrade using the integrated VxVM 5.1 SP1 package from the ignite depot
1
Use HP recommended steps to integrate VxVM 5.1 SP1 package with the
latest 11i v3 fusion.
2
Stop activity to all Storage Foundation volumes. For example, stop any
applications such as databases that access the volumes, and unmount any
file systems that have been created on the volumes.
3
Upgrade the HP-UX 11i v3 operating system to the latest fusion using the
integrated VxVM 5.1 SP1 package. This process installs VxVM 5.1 SP1 package
with the operating system. All disk groups that were created using VxVM 5.0
11i v3 are accessible.
Upgrading from Storage Foundation High Availability or Storage
Foundation for Oracle High Availability from 5.0_11iv3, 5.0.1,
or 5.0.1 RP1 on HP-UX 11i v3 to 5.1 SP1 on HP-UX 11i v3
If your systems are already running Storage Foundation High Availability
5.0_11iv3, 5.0.1, or 5.0.1 RP1 on HP-UX 11i v3, this section describes how to
upgrade to Veritas Storage Foundation High Availability 5.1 SP1. The operating
system must be at a supported level for this upgrade.
This procedure describes upgrading from Storage Foundation High Availability
5.0_11iv3, 5.0.1, or 5.0.1 RP1 on HP-UX 11i v3 to Storage Foundation High
Availability 5.1 SP1 on HP-UX 11i v3. Use the same procedure to upgrade from
Storage Foundation for Oracle High Availability 5.0 on HP-UX 11i v3 to Storage
Foundation High Availability 5.1 SP1.
Performing a phased upgrade
Upgrading Storage Foundation Cluster File System and High Availability software from a release prior to 5.1 SP1
228