Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)
After successful completion of the upgrade, any disk groups that were created in
Storage Foundation 4.1, 4.1 MP1, 4.1 MP2, 5.0. 5.0 MP1, or 5.0 MP2 are accessible
by Storage Foundation 5.1 SP1.
To upgrade from Storage Foundation or Storage Foundation for Oracle on HP-UX
11i v2
1
Perform the necessary preupgrade tasks such as resynchronizing existing
database snapshots.
See “Preparing to upgrade the Veritas software” on page 194.
2
If you have any external Array Policy Modules (APMs) installed, uninstall the
APMs. The following warning message displays during the OS upgrade and
also when you issue an administrative command for HP-UX kernel modules
after the upgrade, until SF 5.0 on HP-UX 11i v3 is installed:
WARNING: The file '/usr/conf/mod/dmpXXX.1' does not
contain valid kernel code. It will be ignored.
This message can be ignored and does not affect the functionality of SF.
3
Upgrade the HP-UX operating system to the latest available HP-UX 11i v3
fusion release.
See “Upgrading the HP-UX operating system” on page 237.
4
If patches to HP-UX 11i v3 are required, apply the patches before upgrading
the product.
5
Install Storage Foundation 5.1 SP1 for HP-UX 11i v3 using the installer script.
# ./installer
6
Enter G to upgrade and press Return.
7
You are prompted to enter the system names on which the software is to be
installed. Enter the system name or names and then press Return.
Depending on your existing configuration, various messages and prompts
may appear. Answer the prompts appropriately.
8
You are prompted to agree with the End User License Agreement. Enter y
and press Return.
Do you agree with the terms of the End User License Agreement as specified
in the storage_foundation/EULA/en/EULA_SF_Ux_5.1SP1.pdf file present on
media? [y,n,q,?] y
Performing a phased upgrade
Upgrading Storage Foundation Cluster File System and High Availability software from a release prior to 5.1 SP1
226