Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

Upgrade the operating system choosing three Base Bundles "Base-VxFS-50,

Base-VxVM-50, Base-VxTools-50"..

Upgrade SFCFS:

# ./installer

Choose the upgrade option "G" when the installer prompts you.

Note: DO NOT reboot the cluster.

Perform the following steps on the second half of the cluster, system03 and

system04, to stop the second half of the cluster.

Note: The downtime starts now.

To stop the second half of the cluster

Stop all the applications that are not configured under VCS.

Stop all VCS service groups.

# hagrp -offline group_name -sys system03

# hagrp -offline group_name -sys system04

Freeze the VCS service groups on the second half of the cluster:

# haconf -makerw

# hagrp -freeze group_name -persistent

# haconf -dump -makero

Stop VCS on the second half of the cluster:

# hastop -local -force

If you created local VxFS mount points on VxVM volumes, added them to

/etc/fstab file, and comment out the mount point entries in the /etc/fstab

file.

Set the LLT_START attribute to 0 in the /etc/rc.config.d/lltconf file:

LLT_START=0

221Performing a phased upgrade

Performing phased upgrade of SFCFS from versions 4.x or 5.x on HP-UX 11i v2 to 5.1SP1