Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

6
Reboot the first half of the cluster:
# /usr/sbin/shutdown -r now
7
After the nodes come up, seed the cluster membership:
# gabconfig -x
The first half of the cluster is now up and running.
Note: The downtime ends here.
Perform the following steps on the second half of the cluster, system03 and
system04, to upgrade the second half of the cluster.
To upgrade the second half of the cluster
1
Upgrade the HP-UX operating system to HP-UX 11.31 Mar 10 fusion.
See “Upgrading the HP-UX operating system” on page 237.
2
Upgrade SFCFS:
# ./installer
Note: DO NOT reboot the cluster.
3
Uncomment the VxFS mount point entries in the /etc/fstab file on the
second half of the cluster.
4
Mount the VxFS file systems.
5
Enable fencing:
# cp /etc/vxfen.d/vxfenmode_scsi3_dmp /etc/vxfenmode
6
Reboot the second half of the cluster:
# /usr/sbin/shutdown -r now
The nodes system03 and system04 now join the first half of the cluster.
Performing a phased upgrade
Performing a phased upgrade from version 5.x on HP-UX 11i v3 to Veritas Storage Foundation Cluster File System 5.1
SP1
218