Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

To perform a full upgrade from SFCFS 5.x on HP-UX 11iv3 to 5.1 SP1 on the latest
HP-UX 11iv3
1
Log in as superuser to one of the nodes in the cluster.
2
If you have created VxFS mount points on VxVM volumes, added them to the
/etc/fstab file, and comment out the mount point entries in the /etc/fstab
file.
3
Stop all applications that use VxFS or VxVM disk groups, whether local or
CFS. If the applications are under VCS control:
# hagrp -offline grp_name -any
If the applications are not under VCS control:
Use native application commands to stop the application.
4
Take offline all VCS groups that contain CFSMount and CVMVolDg
# hagrp -offline group -sys system01
# hagrp -offline group -sys system02
5
Unmount all the non-system VxFS file systems which are not under VCS
control.
# umount /mount_point
6
Make sure that no processes which make use of mounted shared file system
or shared volumes are running.
# fuser -cu mount-point
7
Stop all VCS service groups.
To view the current state of the service groups:
# hagrp -state
To stop each group:
# hagrp -offline servicegroup -sys node_name
209Performing a typical SFCFS upgrade using the installer
Performing a full upgrade from SFCFS 5.x on HP-UX 11iv3 to 5.1 SP1 on the latest HP-UX 11iv3