Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

Performing a typical SFCFS
upgrade using the installer
This chapter includes the following topics:
Performing a full upgrade from SFCFS versions on HP-UX 11i v2 to SFCFS 5.1
SP1
Performing a full upgrade from SFCFS 5.x on HP-UX 11iv3 to 5.1 SP1 HP-UX
11iv3
Performing a full upgrade from SFCFS 5.x on HP-UX 11iv3 to 5.1 SP1 on the
latest HP-UX 11iv3
Performing a full upgrade from SFCFS versions on
HP-UX 11i v2 to SFCFS 5.1 SP1
Use these steps to perform a full upgrade from SFCFS 4.x or 5.x on HP-UX 11i v2
to SFCFS 5.1 SP1:
To upgrade from SFCFS versions on HP-UX 11i v2:
1
Log in as superuser to one of the nodes, system01 for example, in the cluster.
2
Create a backup of the existing cluster configuration. Back up the main.cf
and types.cf on all cluster nodes:
# cp /etc/VRTSvcs/conf/config/main.cf \
/etc/VRTSvcs/conf/config/main.cf.save
# cp /etc/VRTSvcs/conf/config/types.cf \
/etc/VRTSvcs/conf/config/types.cf.save
11
Chapter