Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

4
Run the vxlicrep, vxdisk list, and vxprint -ht commands and record the
output. Use this information to reconfigure your system after the upgrade.
5
If you are installing the high availability version of the Veritas Storage
Foundation 5.1 SP1 software, follow the guidelines given in the Veritas Cluster
Server Installation Guide and Veritas Cluster Server Release Notes for
information on preserving your VCS configuration across the installation
procedure.
Determining which 5.x release of Veritas File System and Veritas
Volume Manager that you have installed
If you are upgrading to this release and have a previously-installed release of
Veritas File System (VxFS) and Veritas Volume Manager (VxVM), you must
determine which release you have installed. Determining which 5.x release that
you have installed can be difficult due to the binary path names being the same
for both releases. Use the following procedures to determine which release you
have installed.
To determine which release of VxFS that you have installed
◆
To determine which release of VxFS that you have installed, enter the
following command:
# swlist -l product VRTSvxfs
If you have the 5.0 release installed, the command output includes the
following information:
VRTSvxfs 5.0.31.0 VERITAS File System
If you have the 5.0.1 release installed, the command output includes the
following information:
VRTSvxfs 5.0.31.5 VERITAS File System
If you have the 5.1 SP1 release installed, the command output includes the
following information:
VRTSvxfs 5.1.100.000 VERITAS File System
193Preparing to upgrade Veritas Storage Foundation Cluster File System
Preparing to upgrade