Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

# brackets ([]), followed by ":" and CPS port number.

# Examples:

# cps1=[192.168.0.23]:14250

# cps2=[mycps.company.com]:14250

# SCSI-3 compliant coordinator disks are specified as:

# vxfendg=<coordinator disk group name>

# Example:

# vxfendg=vxfencoorddg

# Examples of different configurations:

# 1. All CP server coordination points

# cps1=

# cps2=

# cps3=

# 2. A combination of CP server and a disk group having two SCSI-3

# coordinator disks

# cps1=

# vxfendg=

# Note: The disk group specified in this case should have two disks

# 3. All SCSI-3 coordinator disks

# vxfendg=

# Note: The disk group specified in case should have three disks

cps1=[mycps1.company.com]:14250

cps2=[mycps2.company.com]:14250

cps3=[mycps3.company.com]:14250

================================

Enabling or disabling the preferred fencing policy

You can enable or disable the preferred fencing feature for your I/O fencing

configuration.

You can enable preferred fencing to use system-based race policy or group-based

race policy. If you disable preferred fencing, the I/O fencing configuration uses

the default count-based race policy.

See “About preferred fencing” on page 85.

Configuring SFCFS for data integrity

Enabling or disabling the preferred fencing policy

184