Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

#
# Examples:
# cps1=[192.168.0.23]:14250
# cps2=[mycps.company.com]:14250
#
# SCSI-3 compliant coordinator disks are specified as:
#
# vxfendg=<coordinator disk group name>
# Example:
# vxfendg=vxfencoorddg
#
# Examples of different configurations:
# 1. All CP server coordination points
# cps1=
# cps2=
# cps3=
#
# 2. A combination of CP server and a disk group having two SCSI-3
# coordinator disks
# cps1=
# vxfendg=
# Note: The disk group specified in this case should have two disks
#
# 3. All SCSI-3 coordinator disks
# vxfendg=
# Note: The disk group specified in case should have three disks
#
Table 9-4 defines the vxfenmode parameters that must be edited.
Table 9-4
vxfenmode file parameters
Descriptionvxfenmode File
Parameter
Fencing mode of operation. This parameter must be set to
“customized”.
vxfen_mode
Fencing mechanism. This parameter defines the mechanism
that is used for fencing. If one of the three coordination points
is a CP server, then this parameter must be set to “cps”.
vxfen_mechanism
Configure the vxfen module to use either DMP devices, "dmp"
or the underlying raw character devices, "raw".
Note: The configured disk policy is applied on all the nodes.
scsi3_disk_policy
Configuring SFCFS for data integrity
Setting up server-based I/O fencing manually
176