Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

Table 9-3

Sample values in procedure

Sample nameCP server configuration component

mycps1.symantecexample.comCP server

galaxyNode #1 - SFCFS cluster

nebulaNode #2 - SFCFS cluster

clus1Cluster name

{f0735332-1dd1-11b2}Cluster UUID

To manually configure CP servers for use by the SFCFS cluster

Determine the cluster name and uuid on the SFCFS cluster.

For example, issue the following commands on one of the SFCFS cluster nodes

(galaxy):

# grep cluster /etc/VRTSvcs/conf/config/main.cf

cluster clus1

# cat /etc/vx/.uuids/clusuuid

{f0735332-1dd1-11b2}

Use the cpsadm command to check whether the SFCFS cluster and nodes are

present in the CP server.

For example:

# cpsadm -s mycps1.symantecexample.com -a list_nodes

ClusName UUID Hostname(Node ID) Registered

clus1 {f0735332-1dd1-11b2} galaxy(0) 0

clus1 {f0735332-1dd1-11b2} nebula(1) 0

If the output does not show the cluster and nodes, then add them as described

in the next step.

For detailed information about the cpsadm command, see the Veritas Storage

Foundation Cluster File System Administrator's Guide.

Configuring SFCFS for data integrity

Setting up server-based I/O fencing manually

170