Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

After the installer establishes trust between the authentication brokers

of the CP servers and the application cluster nodes, press Enter to

continue.

Verify and confirm the I/O fencing configuration information.

CPS Admin utility location: /opt/VRTScps/bin/cpsadm

Cluster ID: 2122

Cluster Name: clus1

UUID for the above cluster: {ae5e589a-1dd1-11b2-dd44-00144f79240c}

Review the output as the installer updates the application cluster information

on each of the CP servers to ensure connectivity between them. The installer

then populates the /etc/vxfenmode file with the appropriate details in each

of the application cluster nodes.

Updating client cluster information on CP Server 10.210.80.199

Adding the client cluster to the CP Server 10.210.80.199 .................. Done

Registering client node galaxy with CP Server 10.210.80.199.............. Done

Adding CPClient user for communicating to CP Server 10.210.80.199 ......... Done

Adding cluster clus1 to the CPClient user on CP Server 10.210.80.199 ... Done

Registering client node nebula with CP Server 10.210.80.199 ............. Done

Adding CPClient user for communicating to CP Server 10.210.80.199 ......... Done

Adding cluster clus1 to the CPClient user on CP Server 10.210.80.199 ... Done

Updating /etc/vxfenmode file on galaxy .................................. Done

Updating /etc/vxfenmode file on nebula ......... ........................ Done

See “About I/O fencing configuration files” on page 86.

Configure the CP agent on the Storage Foundation Cluster File System

(application cluster).

Do you want to configure CP Agent on the client cluster? [y,n,q]

(y)

Enter a non-existing name for the service group for CP Agent:

[b] (vxfen)

Adding CP Agent via galaxy ........................ Done

Configuring SFCFS for data integrity

Setting up server-based I/O fencing using installsfcfs

164