Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

Would you like to add another SNMP console? [y,n,q,b] (n)
5
Verify and confirm the SNMP notification information.
NIC: lan0
SNMP Port: 162
Console: saturn receives SNMP traps for Error or
higher events
Console: jupiter receives SNMP traps for SevereError or
higher events
Is this information correct? [y,n,q] (y)
Configuring global clusters
If you had installed a valid HA/DR license, the installer provides you an option to
configure this cluster as global cluster.
You can configure global clusters to link clusters at separate locations and enable
wide-area failover and disaster recovery. The installer adds basic global cluster
information to the VCS configuration file. You must perform additional
configuration tasks to set up a global cluster.
See the Veritas Storage Foundation Cluster File System Installation Guide for
instructions to set up Storage Foundation Cluster File System global clusters.
Note: If you installed a HA/DR license to set up replicated data cluster or campus
cluster, skip this installer option.
To configure the global cluster option
1
Review the required information to configure the global cluster option.
2
Specify whether you want to configure the global cluster option.
Do you want to configure the Global Cluster Option? [y,n,q] (n) y
If you skip this option, the installer proceeds to configure VCS based on the
configuration details you provided.
127Configuring Veritas Storage Foundation Cluster File System
Configuring Veritas Storage Foundation Cluster File System using the script-based installer