Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

(example: [e-mail]): [b,q,?] [e-mail]
Enter the minimum severity of events for which mail should be
sent to [e-mail] [I=Information, W=Warning,
E=Error, S=SevereError]: [b,q,?] E
■ If you do not want to add, answer n.
Would you like to add another SMTP recipient? [y,n,q,b] (n)
5
Verify and confirm the SMTP notification information.
NIC: lan0
SMTP Address: smtp.example.com
Recipient: [e-mail] receives email for Warning or
higher events
Recipient: [e-mail] receives email for Error or
higher events
Is this information correct? [y,n,q] (y)
Configuring SNMP trap notification
You can choose to configure VCS to send event notifications to SNMP management
consoles. You need to provide the SNMP management console name to be notified
and message severity levels.
Note that you can also configure the notification after installation.
Refer to the Veritas Cluster Server Administrator's Guide for more information.
To configure the SNMP trap notification
1
Review the required information to configure the SNMP notification feature
of VCS.
2
Specify whether you want to configure the SNMP notification.
Do you want to configure SNMP notification? [y,n,q,?] (n) y
See “Configuring global clusters” on page 127.
3
Provide information to configure SNMP trap notification.
Provide the following information:
■ Enter the NIC information.
125Configuring Veritas Storage Foundation Cluster File System
Configuring Veritas Storage Foundation Cluster File System using the script-based installer