Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

To configure SMTP email notification
1
Review the required information to configure the SMTP email notification.
2
Specify whether you want to configure the SMTP notification.
Do you want to configure SMTP notification? [y,n,q,?] (n) y
If you do not want to configure the SMTP notification, you can skip to the
next configuration option.
See “Configuring SNMP trap notification” on page 125.
3
Provide information to configure SMTP notification.
Provide the following information:
■ Enter the NIC information.
Active NIC devices discovered on galaxy: lan0
Enter the NIC for the VCS Notifier to use on galaxy:
[b,q,?] (lan0)
Is lan0 to be the public NIC used by all systems?
[y,n,q,b,?] (y)
■ Enter the SMTP server’s host name.
Enter the domain-based hostname of the SMTP server
(example: smtp.yourcompany.com): [b,q,?] smtp.example.com
■ Enter the email address of each recipient.
Enter the full email address of the SMTP recipient
(example: [e-mail]): [b,q,?] [e-mail]
■ Enter the minimum security level of messages to be sent to each recipient.
Enter the minimum severity of events for which mail should be
sent to [e-mail] [I=Information, W=Warning,
E=Error, S=SevereError]: [b,q,?] w
4
Add more SMTP recipients, if necessary.
■ If you want to add another SMTP recipient, enter y and provide the
required information at the prompt.
Would you like to add another SMTP recipient? [y,n,q,b] (n) y
Enter the full email address of the SMTP recipient
Configuring Veritas Storage Foundation Cluster File System
Configuring Veritas Storage Foundation Cluster File System using the script-based installer
124