Veritas Storage Foundation 5.1 SP1 Cluster File System Installation Guide (5900-1510, April 2011)

Enter the absolute path of the CP server database or press Enter to accept

the default value (/etc/VRTScps/db).

CP Server uses an internal database to store the client information.

Note: As the CP Server is being configured on SFHA cluster, the

database should reside on shared storage with vxfs file system.

Please refer to documentation for information on setting up of

shared storage for CP server database.

Enter absolute path of the database (Default:/etc/VRTScps/db):

Verify and confirm the CP server configuration information.

Following is the CP Server configuration information:

-------------------------------------------------

(a)CP Server Name: mycps1.symantecexample.com

(b)CP Server Virtual IP: 10.209.83.85

(c)CP Server Port: 14250

(d)CP Server Security : 1

(e)CP Server Database Dir: /etc/VRTScps/db

-------------------------------------------------

Press b if you want to change the configuration, <enter> to continue :

The configuration utility proceeds with the configuration process, and creates

a vxcps.conf configuration file on each node.

The following output is for one node:

Successfully generated the /etc/vxcps.conf

configuration file.

Successfully created directory /etc/VRTScps/db.

Creating mount point /etc/VRTScps/db on

mycps1.symantecexample.com.

Copying configuration file /etc/vxcps.conf to

mycps1.symantecexample.com

Configuring CP Server Service Group (CPSSG) for this cluster

----------------------------------------------

Preparing to configure SFCFS

Setting up the CP server

106